Precise and energy injection molding machine 160TON
1.Technical Specification
|
Unit |
D160S |
||||||
ITEMS |
A |
B |
C |
|||||
INECTION UNIT |
Screw Diameter |
mm |
42 |
45 |
50 |
|||
Screw L/D Ratio |
L/D |
21.4 |
20.0 |
18.0 |
||||
Shot Size(Theoretical) |
cm3 |
287 |
329 |
406 |
||||
Injection Weight |
g |
261 |
300 |
370 |
||||
Injection Pressure |
MPa |
212.8 |
185.4 |
150.2 |
||||
Injection Rate into Air |
cm3/s |
125 |
156.3 |
143.5 |
179.4 |
177.2 |
221.4 |
|
Injection Stroke |
mm |
207 |
||||||
Injection Speed |
cm/s |
9/11.3 |
||||||
Screw Speed |
rpm |
202 /252 |
||||||
CLAMPING UNIT |
Clamping Force |
KN |
1600 |
|||||
Clamping Stroke |
mm |
480 |
||||||
Space Between Tie Bar |
mm |
470*470 |
||||||
Max. Mold Height |
mm |
530 |
||||||
Min. Mold Height |
mm |
200 |
||||||
Eject Stroke |
mm |
150 |
||||||
Eject Force |
KN |
34 |
||||||
No. Of Ejector Pins |
piece |
5 |
||||||
OTHERS |
Max. Pump Pressure |
MPa |
17.5 |
|||||
Pump Motor Power |
KW |
15.0 |
18.5 |
|||||
Heater Power |
KW |
9.4 |
||||||
Hopper Capacity |
Kg |
25 |
||||||
Oil Tank Capacity |
L |
350 |
||||||
Weight |
T |
5.2 |
2. Standard Features
**Function list for Injection Unit
-Standard -Nitride Screw and barrel, stainless hopper
-Screw RPM display
-Plasticizing with hydraulic motor
-Two parallel injection cylinders.
Ensure no skewing on spray nozzle and no leaking of materials
**Function list for Clamping Unit
-T-Slot mold platen
- High rigid 5 points clamping unit
-Mechnical and electrical safety
-Hydraulic motor for mould height adjusting
-Auto- mold height adjusting function
-Clamping & mould open control with transducer
-Auto-monitoring central lubrication system
-Adjustable support for moving platen
-High rigid steel slide tape for moving platen
-One group of water regulators
**Function list for Hydraulic Unit
-Oil temperature control and alarm
-Oil tank level and alarm
-Oil suck filter and air filter system
**Function list for Electronics Part
-Techmation brand computer controller
-80-100 sets of mold parameter memory
-All action instant monitoring function
-Production monitoring function
-Failure &alarm display function
-I/O monitoring interface
-3 color light (with alarm)
-Electrical motor overload protection
-Front/back door emergency stop switch
-15A/5 pins single phase socket, one group
-Double protection for heating
-SSR heating control
3.Mold platen drawing
4. Machine Size